Products
Centre Pivot Specifications: Options and Accessories
Collector ring end gun control/auto stop
Active/deactivate end gun from collector ring at pivot point or stop system at predetermined point.
End of field stop
Allows the system to be stopped at present positions such as obstructions (Activation unit is mounted on the last drive unit).
End of field stop/auto reverse
System automatically goes into reverse at preset positions.
Low pressure shut-down
Shuts the system off if a water pressure loss occurs.
Pressure start
Starts the system automatically when water pressure has reached a predetermined level at the pivot.
Ap-protection
Shuts the pumping unit off if the system fails to move after predetermined time. For operation without cable connection, power for pump and pivot must come from the same electrical supply point.
Standard Pivot inlet
Galvanised flanged pipe and bends connect underground mainline to pivot inlet flange. Provision made for fitting electrically or hydraulically operated valve.
Wheels and tyres
The standard tyre is a 13.6x24, mounted on a 12x24 galvanised rim.
Four wheeler
Available for 152mm and 165mm spans up to seven spans.
High speeds motors
The standard motor is a 0,56kW; 40:1; 35 RPM unit. A 1,1 kW; 30:1; 48 RPM motor for high speed operation is available.
Electronic control panels
The basic APT electronic panel, PAT part circle electronic panel, and PRO full networking electronic panel, are available with radio or cell phone communication as an optional extra.
Control Panel Options
Please note:
- Many of the options may vary with new models being updated regularly.
- Make sure that you order the panel you prefer with the specific options you need.
- The above panels do not necessarily include all the marked options as standard.
- The APT and PAT panels can also be connected to a network system.
|